Enviro-LOGO

Anemometer PCE-WSAC 50-210

The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements. The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes. If the wind speed values ​​are higher than the preset values, a pre-alarm is first activated before the alarm is output. Both alarms are given visually and acoustically on the wind warning device. If the pre-alarm takes effect, a yellow LED will flash on the front of the device and a beeper will emit a periodic warning tone. When the normal alarm needs to be activated, the red LED will flash and the beep will be played continuously by the device.

Power supply 115V AC
Supply voltage for sensors (output) 12V DC
24V DC
Measuring range 0 … 50 m/s
Measuring accuracy ± 3% of measuring range
Signal input 4 … 20 mA
Alarm relay
2 NO/NC relays with max. load of 220V AC / 10 A
Operating temperature -20 … 60°C / -4 … 140°F
Protection class IP66
Dimensions 197.5 x 90 x 45 mm / 7.7 x 3.5 x 1.7 in