Water Analysis Meter PCE-CP 20

Category Tag
The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter water analysis meter. With this multi-parameter water analysis meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter water analysis meter, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter water analysis meter generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample.

AED 2,418.00

Alkalinity
Measuring range     0… 30 mg / l
  30… 60 mg / l
  60… 100 mg / l
100… 200 mg / l
Accuracy   3 mg / l
  7 mg / l
12 mg / l
18 mg / l
Resolution   1 mg / l
Chlorine
Measuring range 0.00 … 2.00 mg / l
2.00 … 3.00 mg / l
3.00 … 4.00 mg / l
4.00 … 8.00 mg / l
Accuracy 0.10 mg / l
0.23 mg / l
0.75 mg / l
1.00 mg / l
Resolution 0.01 mg / l
Cyanuric acid
Measuring range     0… 15 mg / l
  15… 50 mg / l
  50… 120 mg / l
120… 160 mg / l
Accuracy   1 mg / l
  5 mg / l
13 mg / l
19 mg / l
Resolution   1 mg / l
pH
Measuring range 6.50 … 8.40 pH
Accuracy 0.11 pH
Resolution 0.01 pH
Total hardness
Measuring range     0… 30 mg / l
  30… 60 mg / l
  60… 100 mg / l
100… 200 mg / l
200 … 300 mg / l
300 … 500 mg / l
Accuracy   3 mg / l
  5 mg / l
10 mg / l
17 mg / l
22 mg / l
58 mg / l
Resolution   1 mg / l
Calcium hardness
Measuring range     0… 25 mg / l
  25… 100 mg / l
100 … 300 mg / l
300 … 500 mg / l
Accuracy   8 mg / l
22 mg / l
34 mg / l
45 mg / l
Resolution   1 mg / l
Further specification
Unit mg / l, ppm
Hardness units mg / l CaCO3, ppm, mmol / l KS 4.3,
° dH (degree of German hardness),
° e (degree of English hardness / degree Clark),
° f (degree of French hardness)
Calibration Zero point calibration
Light source 503 nm / 570 nm / 620 nm LED
Light detector Photodiode
Power supply 4 x 1.5V AA batteries
Dimensions of the cuvette 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Menu languages English, German, French, Spanish and Italian
Storage Automatic storage of measured values ​​and readout
Storage space 256 values
Interface Bluetooth connection with app and PC software
Automatic shutdown After 300 seconds of inactivity
Operating conditions 5… 45°C, 20 … 90% RH non-condensing
Storage conditions 5… 45°C, 20 … 90% RH non-condensing
Dimensions 165 x 95 x 50 mm / 6.5 x 3.7 x 2 in
Weight 230 g / < 1 lb