Limit Touch Switch NL

• Instantaneous operation upon contact with extremely limited hysteresis for high-precision position detection.

• Detects minute displacement or lightweight objects with minimal operating force.

• Built-in LED indicator ensures easy operation monitoring.

• DC models provide versatile functions in combination with the S3D2 Sensor Controller.

Model NL1 NL2 NL3
Degree of protection IP60
Supply voltage 12 VDC 24 VDC 100 VAC or 200 VAC
Rated frequency 50/60 Hz
Sensitivity Grounded object: Contact resistance of 3 kΩ max.
Non-grounded object: Antenna-to-ground capacitance of 100 pF min.
Current consumption 8 mA 15 mA
Leakage current Circuit: 2 mA; Antenna: 1 mA *1
Response time 5 ms max. 20 ms max.
Output signal Voltage output model: 30
mA at 12 VDC with output
impedance of 4.7 kΩ
Current output model:
24 VDC (directly
switching resistive load
of 170 mA max.)
Thyristor output model: 100 or 200
VAC (directly switching resistive load
of 30 to 300 mA) *2
Insulation resistance 0 V (blue lead wire) is connected to casing 100 MΩ min. at 500 VDC *3
Dielectric strength 0 V (blue lead wire) is connected to casing 1,500 VAC at 50/60 Hz for 1 min *3
Pollution degree
(operating environment)
3 (IEC947-5-1)
Protection against
electric shock
Class II
Proof tracking index
(PTI)
175
Switch category D (IEC335)
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance 200 m/s2 max.
Ambient temperature -10°C to +60°C (with no icing)
Ambient humidity 35% to 95%RH
Weight Approx. 370 g (NL[]-C, -P) Approx. 550 g (NL[]-S) Approx. 680 g (NL[]-SP, -SC)