Enviro-LOGO

Force Gauge PCE-DFG NF 1K

Category Tag

The force gauge with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell is connected to the force gauge by a sensor cable of approx. 3 m length and thanks to the small cell dimensions it ensures a versatile application.

Measuring range 0 … 1 kN / 1,000 N / 102 kg / 225 lbs
Resolution 0.1 N / 0.02 lbs
Accuracy ± 0.5% of the measuring range
Measurement units N, kg, lb, kPa
Display 2.8″ TFT graphic display
Alarm Modes Inside, Outside, Crack, Shutdown
Sampling rate 6 … 1600 Hz
Storage 100 measurements
Power supply NiMH battery, 6V / 1600-mAh
Battery life About 10 hours
Power adapter / charging adapter 12V / 1A
Outputs Interface: USB switching output: 12V / 50-mA
Protection class IP 54
Operating and storage conditions -10 … 50°C / -14 … 122°F
5 … 95% rh non-condensing
Dimensions load cell Ø 20 mm / H 12 mm / M3 thread
(see technical drawing)
Cable length load cell About 3 m / 9.8 ft
Dimensions 200 x 97 x 42 mm / 7.9 x 3.8 x 1.7 in
Weight 540 g / 1.2 lbs