Enviro-LOGO

Force Gauge PCE-DFG N 10K

The force gauge measures both tensile and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the test laboratory, for example, to determine the yield strength, the pull-off force, and the force required to actuate a push-button or switch. The force gauge is supplied with an external measuring cell. Depending on the model, the force gauge can measure up to 10,000 N / 2,248 lbs. Models for 1,000 N / 225 lbs, 2,500 N / 562 lbs and 5,000 N / 1,124 lbs are still available. Various eyelets or hooks with M10 or M12 thread can be adapted to the measuring cells, but your own devices with this thread can be mounted on the measuring cell.

Measuring range 0 … 10,000 N / 0 … 2,248 lbs
Resolution 5 N / 1.12 lbs
Accuracy ± 0.1% of the measuring range
Measurement units N, kg, lb, KPa
Display 2.8″ TFT graphic display
Alarm Modes Inside, Outside, Crack, Shutdown
Sampling rate 6 … 1600 Hz
Storage 100 measurements
Power supply NiMH battery, 6V / 1600-mAh
Battery life About 10 hours
Power adapter / charging adapter 12V / 1A
Outputs Interface: USB
Switching output: 12V / 50-mA
Protection class IP 54
Operating and storage conditions -10 … 50°C / 14 … 122°F
5 … 95% rh non-condensing
Mounting thread Measuring cell
up to 1,000 N / 225 lbs
2,500 … 10,000 N / 562 … 2,248 lbs
M10
M12
Dimensions 200 x 97 x 42 mm / 7.9 x 3.8 x 1.7
Weight 540 g / 1.2 lbs