• Wide time range from 1/100 seconds to 9999 hrs.
• Built-in power supply incorporated in timer enables direct connection of sensors and other components.
• Draw-out construction allows maintenance without disconnecting the wiring.
• Power supply freely selectable within a range of 100 to 240 VAC; a DC-operated version is also available.
• Control outputs of both contact type and transistor type simultaneously available.
• Seven operating modes (N, F, C, R, K, P, and Q) are available.
|Rated supply voltage||H5AN-4D: 100 to 240 VAC (50/60 Hz), 12 to 24, 48, or 100 VDC (permissible ripple: 20% max.)
H5AN-4DM: 100 to 240 VAC (50/60 Hz), 12 to 24 VDC (permissible ripple: 20% max.)
|85% to 110% of rated supply voltage|
|Power consumption||Approx. 10 VA (at 240 VAC), approx. 5 W (at 24 VDC)|
|Resetting system and
|Reset by power-OFF: min. power OFF time: 0.5 s *
External reset or gate (common to contact and transistor inputs): min. reset input signal
width: 0.02 s
|One-shot output time||0.1 to 1 s (adjustable)|
|Control outputs||Contact output: SPDT, 3 A at 250 VAC, resistive load (cosφ = 1)
Transistor output: Open collector, 100 mA max. at 30 VDC max.
|Power supply for
|12 VDC±10%, 80 mA (permissible ripple: 5% max.)|
|Case color||Light gray (Munsell 5Y7/1)|
* This does not apply to to the models ending with -M when memory backup is enabled.
|Accuracy of operating time||±0.01% ±0.05 s max. (power OFF start), ±0.005% ±0.03 s max. (reset start) *1|
|Influence of voltage|
|Influence of temperature|
|Insulation resistance||100 MΩ min. (at 500 VDC) (between current-carrying terminal and exposed non-
current carrying metal parts, between non-continuous contacts)
|Dielectric strength||2,000 VAC, 50/60 Hz for 1 min (between current-carrying and non-current-carrying
750 VAC, 50/60 Hz for 1 min (between non-continuous contacts)
|Impulse withstand voltage||6 kV (between power supply terminal)
6 kV (between current-carrying terminal and exposed non-current carrying metal parts)
|Vibration resistance||Destruction: 10 to 55 Hz with 0.75-mm double amplitude
Malfunction: 10 to 55 Hz with 0.5-mm double amplitude
|Shock resistance||Destruction: 300 m/s2 (approx. 30G)
Malfunction: 100 m/s2 (approx. 10G)
|Ambient temperature||Operating: -10°C to 55°C
Storage: -25°C to 65°C
|Ambient humidity||Operating: 35% to 85%|
|Life expectancy||Mechanical: 10,000,000 operations min. (under no load at 1,800 operations/h)
Electrical: 100,000 operations min. (3 A at 250 VAC, resistive load)
|Degree of protection||IP-30|
|Memory backup storage
|Non-volatile memory (Number of writes: 1 million times, Data retention: 10 years)|
|Weight||Approx. 360 g|
|Approved safety standards||UL508/CSA C22.2 No. 14
conforms to EN61812-1 (Pollution degree 2/overvoltage category III)
CCC: GB/T 14048.5 Pollution degree 2, Overvoltage category III *
Emission Enclosure: EN55011 Group 1 class A
Emission AC mains: EN55011 Group 1 class A
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Burst: IEC61000-4-4
Immunity Surge: IEC61000-4-5
Immunity Conducted Disturbance: IEC61000-4-6
Immunity Voltage Dip/Interruption:IEC61000-4-11
* CCC certification requirements.
|Recommended fuse||Contact Output:
021602.5 (250 VAC, 2.5 A), manufactured by Littelfuse
0216.100 (250 VAC, 100 mA) manufactured by Littelfuse
|Rated operating voltage Ue
Rated operating current Ie
AC-15: Ue: 250 VAC, Ie: 3 A
DC-13: Ue: 30 VDC, Ie: 0.5 A
DC-13: Ue: 30 VDC, Ie: 0.1 A
|Rated insulation voltage||250 V|
|Rated impulse withstand voltage
(altitude: 2,000 m max.)
|4 kV (at 240 VAC)|
|Conditional short-circuit current||1,000 A|