The force gauge with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell is connected to the force gauge by a sensor cable of approx. 3 m length and thanks to the small cell dimensions it ensures a versatile application.
| Measuring range | 0 … 1 kN / 1,000 N / 102 kg / 225 lbs |
| Resolution | 0.1 N / 0.02 lbs |
| Accuracy | ± 0.5% of the measuring range |
| Measurement units | N, kg, lb, kPa |
| Display | 2.8″ TFT graphic display |
| Alarm Modes | Inside, Outside, Crack, Shutdown |
| Sampling rate | 6 … 1600 Hz |
| Storage | 100 measurements |
| Power supply | NiMH battery, 6V / 1600-mAh |
| Battery life | About 10 hours |
| Power adapter / charging adapter | 12V / 1A |
| Outputs | Interface: USB switching output: 12V / 50-mA |
| Protection class | IP 54 |
| Operating and storage conditions | -10 … 50°C / -14 … 122°F 5 … 95% rh non-condensing |
| Dimensions load cell | Ø 20 mm / H 12 mm / M3 thread (see technical drawing) |
| Cable length load cell | About 3 m / 9.8 ft |
| Dimensions | 200 x 97 x 42 mm / 7.9 x 3.8 x 1.7 in |
| Weight | 540 g / 1.2 lbs |
