• Approved by EN, UL, CSA, and CCC (Chinese standard). (Ask your OMRON representative for information on approved models.)
• Incorporates a switch with a durable coil spring in a tough, highprecision case.
• Compact and uses a single basic switch for applications where strength is required.
• Models for microloads and models with operation indicators added to series.
• Terminal protective cover can be switched to wire cable from either the left or right.
• Sealing characteristics that meet IEC IP67 degree of protection.
| Agency | Standard | File No. | Approved models |
|---|---|---|---|
| UL | UL508 | E76675 | General-purpose models listed on Data Sheet. |
| CSA | CSA C22.2 No. 14 | LR45746 | |
| TÜV Rheinland | EN60947-5-1 | J50062486 | All SHL models listed in this datasheet. |
| CCC (CQC) | GB/T14048.5 | Contact your OMRON representative for details. |
Ask your OMRON representative for information on approved models. |
| Rated voltage | Non-inductive load (A) | Inductive load (A) | ||||||
|---|---|---|---|---|---|---|---|---|
| Resistive load | Lamp load | Inductive load | Motor load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
| 125 VAC 250 VAC 480 VAC |
10 10 2 |
1.5 1.5 – |
3 2 – |
2.5 1.5 – |
||||
| 8 VDC 14 VDC 30 VDC 125 VDC 250 VDC |
10 10 5 0.4 0.2 |
2 2 1.5 0.4 0.2 |
5 5 1.5 0.05 0.03 |
2 2 1.5 0.05 0.05 |
||||
| Inrush current | NC | 15 A max. |
|---|---|---|
| NO | 15 A max. |
| Rated voltage | Non-inductive load (A) | |
|---|---|---|
| Resistive load | ||
| NC | NO | |
| 125 VAC | 0.1 | |
| 8 VDC 14 VDC 30 VDC |
0.1 0.1 0.1 |
|
| Model | Category and rating | I the |
|---|---|---|
| SHL-[]55 | AC-15 2 A/125 V DC-12 2 A/48 V |
5 A 5 A |
| SHL-[]55-01 | AC-14 0.1 A/125 V DC-12 0.1 A/48 V |
0.5 A 0.5 A |
| SHL-[]55-L | AC-15 2 A/125 V | 5 A |
| SHL-[]55-01L | AC-14 0.1 A/125 V | 0.5 A |
| SHL-[]55-01L2 | DC-12 0.1 A/12 V | 0.5 A |
| SHL-[]55-L3 | DC-12 2 A/24 V | 5 A |
| SHL-[]55-01L3 | DC-12 0.1 A/24 V | 0.5 A |
| SHL-[]55-L4 | DC-12 2 A/24 V | 5 A |
| SHL-[]55-01L4 | DC-12 0.1 A/24 V | 0.5 A |
| SHL-[]55-L5 | DC-12 2 A/48 V | 5 A |
| SHL-[]55-01L5 | DC-12 0.1 A/48 V | 0.5 A |
| Rated voltage | Carry current | Current (A) | Volt-amperes (V) | ||
|---|---|---|---|---|---|
| Make | Break | Make | Break | ||
| 120 VAC 240 VAC |
10 A | 60 30 |
6 3 |
7,200 | 720 |
| Degree of protections *1 | IP67 (EN60947-5-1) | |
|---|---|---|
| Durability *2 | Mechanical | 10,000,000 operations min. |
| Electrical | 500,000 operations min. | |
| Operating speed | 0.1 mm/s to 0.5 m/s (hinge lever models) | |
| Operating frequency |
Mechanical | 120 operations/min |
| Electrical | 30 operations/min | |
| Rated frequency | 50/60 Hz | |
| Insulation resistance | 100 MΩ min. (at 500 VDC) | |
| Contact resistance | 15 mΩ max. (initial value for the built-in switch when tested alone) | |
| Dielectric strength |
Between terminals of the same polarity |
1,000 VAC, 50/60 Hz for 1 min |
| Between each terminal and non-current-carrying metal part |
2,000 VAC, 50/60 Hz for 1 min/Uimp at 2.5 kV (EN60947-5-1) | |
| Rated insulation voltage (Ui) | 150 V (EN60947-5-1) | |
| Pollution degree (operating environment) | 3 (EN60947-5-1) | |
| Short-circuit protective device (SCPD) | 10 A fuse type gI or gG (IEC60269) | |
| Conditional short-circuit current | 100 A (EN60947-5-1) | |
| Conventional enclosed thermal current (Ithe) | 5 A (EN60947-5-1) | |
| Protection against electric shock | Class II (grounding not required with double insulation) | |
| OFF reverse voltage | 1,000 VAC max., 300 VDC max. (EN60947-5-1) | |
| Vibration resistance |
Malfunction | 10 to 55 Hz, 1.5-mm double amplitude |
| Shock resistance |
Destruction | 1,000 m/s2 max. |
| Malfunction | 300 m/s2 max. | |
| Ambient operating temperature | -10°C to +80°C (with no icing) | |
| Ambient operating humidity | 35% to 95%RH | |
| Weight *3 | Approx. 62 to 72 g | |
![D4E-[]N](https://enviromiddleeast.com/wp-content/uploads/2022/12/l_330-13-118653-198x198-1.jpg)
![D4A-[]N](https://enviromiddleeast.com/wp-content/uploads/2022/12/l_328-13-118647-198x198-1.jpg)
